SP Elite Hybrid (Water-Based) 24 OZ Countertop Protective Topcoat

SP Elite Topcoat sets a new standard in protective coatings with its advanced Hybrid formula, engineered to deliver unparalleled durability and resilience. 

Offering exceptional resistance against abrasion, chemicals, and UV exposure, SP Elite ensures long-lasting protection for a wide range of surfaces. Works great over any Epoxy, and PolyKote Surfaces. Extremely long working time. No more dealing with roller lines as it's super easy to apply!

Add water as needed to thin product.

Available in Natural Matte and Gloss.

SP Elite Installation 

Product Overview: SP Elite is a high-quality Hybrid formula designed for various surface applications. 

Preparation: Ensure the substrate is sanded well with 220 grit and is clean, dry, and free from any contaminants before application. Shake the product well before mixing.

Mixing:

1. Combine 2 parts of Component "A" with 1 part of Component "B". (Shake “A” component really well first)
2. Mix the components thoroughly for approximately 60 seconds until a consistent mixture is achieved.
3. Note: If the "A" side with the gloss appears thicker you can add a touch of water while mixing to achieve the desired consistency. The "A" can thicken slightly in transit when environments change in climate. Shake upon receiving. Crack the top and allow to rest for 1 minute before applying.

Application Tips:

1. Rollers- 1/4" nap work best. Size- for anything larger than a sample board, use 6" or 9". But if you choose 9" be sure to mix extra material to allow for the roller to absorb some.

   
   

   For GLOSS formula use a 1/4" nap roller for the wet roll and finish with a 1/2" nap dry roller. MATTE formula can be applied in the same manner if desired.

   
   
   Recipe: 0.375 x sq ft. Of project = ounces needed. Round up to next number if needed (example: 50 sq ft x .375 = 18.75. Round up to 21 since it's a 2:1 and increases by increments of 3.)

Storage: Keep SP Elite in a cool, dry storage area away from direct sunlight. Ensure the container is tightly sealed after each use to maintain product integrity.

Cleaning: Use water to clean application tools immediately after use to prevent the Topcoat from hardening.

Drying Time: SP Elite will be dry to the touch in approximately 24 hours at a temperature of 70 degrees Fahrenheit.

Shelf Life: The shelf life of SP Elite is 6 months from the date of manufacture. Ensure proper storage to maximize product lifespan.

Safety Precautions:

• Keep SP Elite out of reach of small children to prevent accidental ingestion.
• In the event of contact with eyes, immediately flush with water and seek medical attention.
• If ingested, seek medical attention promptly.

Note: This user manual serves as a general guideline. For specific application instructions and safety precautions, always refer to the product label and consult with a professional if needed.