NEW RELEASE!! Fortified UTC (Water-Based) 24 OZ Easy to Apply Countertop Protective Topcoat. (Approx. 100 SF per kit)

The "No Lap lines" Fortified Urethane Topcoat sets a new standard in protective coatings with its advanced Hybrid formula, engineered to deliver unparalleled durability and resilience. This is replacing the SP Elite, does more square footage and is more user friendly.

Offering exceptional resistance against abrasion, chemicals, and UV exposure, Fortified Urethane Topcoat ensures long-lasting protection for a wide range of surfaces. Works great over any Epoxy and PolyKote Surfaces. Longer working time. 

Available in Natural Matte and Gloss.

Fortified Urethane Topcoat Installation

Product Overview:
Fortified Urethane Topcoat is an all new designed Topcoat high-quality Hybrid formula designed for various surface applications and is easier to apply.

Preparation:
Ensure the substrate is sanded well with 320 grit and is clean, dry, and free from any contaminants before application. Shake the product well before mixing.

Mixing:

• Combine 2 parts of Component "A" with 1 part of Component "B". Shake well and use provided strainer with the "A" component for the matte. The "A" component could have settling creating tiny particles. Strain contents directly into measuring cup to volume needed and finish with a flawless finish.
• Mix the components thoroughly for approximately 2 minutes until a consistent mixture is achieved.
  

Application Tips: 

• Rollers: 3/8" nap work best. Size— for anything larger than a sample board, use 6" or 9". But if you choose 9", be sure to mix extra material to allow for the roller to absorb some. After initial roll, immediately back roll with a dry roller 1 time for a perfect Leather Type finish.

Recipe:
0.25 x sq ft. of project = ounces needed. Round up to the next number if needed (example: 50 sq ft x 0.25 = 12.5 OZ. It's a 2:1 ratio.

Storage:
Keep Fortified Urethane Topcoat in a cool, dry storage area away from direct sunlight. Ensure the container is tightly sealed after each use to maintain product integrity.

Cleaning:
Use water to clean application tools immediately after use to prevent the Topcoat from hardening.

Drying Time:
Fortified Urethane Topcoat will be dry to the touch in approximately 24 hours at a temperature of 70 degrees Fahrenheit. Could take longer if temperatures are lower. The natural Matte will take longer to fully matte out if temps are low.

Shelf Life:
The shelf life of Fortified Urethane Topcoat is 6 months from the date of manufacture. Ensure proper storage to maximize product lifespan.

Safety Precautions:

• Keep Fortified Urethane Topcoat out of reach of small children to prevent accidental ingestion.
• In the event of contact with eyes, immediately flush with water and seek medical attention.
• If ingested, seek medical attention promptly.

Note: This user manual serves as a general guideline. For specific application instructions and safety precautions, always refer to the product label and consult with a professional if needed.